NX Stage 3 Kit (35-200HP) – 2011-Up 5.0 COYOTE

Description

NOTE: 18-20’s can only support up to a 100 shot safely because of the 12:1 high compression motors.

We offer three different stages of nitrous kits, each offering unique benefits, but all of them have been designed to provide the safest ways to use nitrous.

The Stage 1 kit is what we would consider the bare minimum kit to run nitrous safely. We start with a base NX Coyote kit, then add a nitrous pressure gauge, purge kit (used to clear air from nitrous line for more consistent nitrous delivery), and an RPM window switch that prevents the nitrous from spraying at too low of an RPM, which could damage the engine.

The Stage 2 kit includes everything the Stage 1 kit includes, but also adds an automatic bottle heater. A bottle heater is used to maintain nitrous pressure at the optimum pressure (1050 psi). This is very important for both maximum performance, as well as safety. As low nitrous pressure is what causes those big nitrous backfire explosions that you’ve probably seen at the track. Maintaining bottle pressure is hugely important.

The Stage 3 kit starts as the Stage 2 kit, but replaces the RPM Window Switch with the Maximizer 5, which is a fully programmable digital nitrous controller. A controller allows us to do all sorts of cool things with the nitrous. We can run a larger shot, like 125 shot, but ramp the nitrous in on the hit. So, for example, we can start spraying 25 hp out of the hole, and then ramp to the full 125 shot by 4k RPM. It’s a great way to both increase safety, as well as improve traction for racing. There’s a big difference, when using nitrous, when you ramp in an extra 125 hp, versus hammering the motor instantly with 125 hp. This is what the controller does.

***NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLE. THE SALE, USE, OR INSTALLATION OF THIS PRODUCT MAY ALSO BE ILLEGAL NATIONWIDE UNDER THE FEDERAL CLEAN AIR ACT (42 U.S.C. § 7522(A)(3)).

CAUTION: An experienced technician familiar with the use and handling of high-pressure cryogenic gases should install this system. If you have any doubt about your skills this system should be taken to a qualified shop for installation.
WARNING! Improper installation and/or adjustment of this product can result in major engine/vehicle damage.
NOTE: Nitrous Express and OZ Tuning holds no responsibility for any engine damage or personal injury that results from the misuse of this product or improper installation, including but not limited to injury or death caused by the mishandling of NOS.
IT IS THE RESPONSIBILITY OF THE INSTALLER AND/OR USER OF THIS PRODUCT TO ENSURE THAT IT IS USED IN COMPLIANCE WITH ALL APPLICABLE LAWS AND REGULATIONS.