Fabtech 3.5in Ball Joint UCA System – Component Box 2019 Ford Ranger 4WD

This quality 2019 Ford Ranger Upper Control Arm system is perfect for owners looking to increase ride height to run slightly larger tires than factory. The system will provide additional wheel travel with no suspension bind at full droop.




Fabtech’s Upper Control Arm system provides a 3.5″ lift over stock with increased wheel travel and no suspension bind at full droop. Lift is accomplished with steel spacers that utilize the factory Coilover shocks for a stock ride. The replacement Upper Control Arms address the geometry of the front suspension with the new ride height for proper alignability. Heavy duty ball joints allow for extended suspension travel to eliminate binding. The system has been designed for proper CV axle angle and plunge thus eliminating the need to reposition the front differential. Rear lift comes from 1.5″ blocks and u-bolts.This 3.5″ Upper Control Arm system allows clearance of 31″ tires without the removal or cutting of the factory Intrusion Beams located in the front fenderwell. The Intrusion Beams are an integral part of the front collision safety impact feature of the Ranger and limits tire clearance to a 31″ tire with a 3.5″ lift. For Ranger owners that want to run a 33″ tire, Fabtech offers optional replacement Offset Intrusion Beams. They directly replace the factory units helping to retain the safety feature of the Beams while allowing clearance of 33″ tires. These 1/4″ thick steel Beams are offset to allow full steer with 33/12.50R tires w/ a 5″ back space wheel.

Additional information

Weight 41 lbs
Dimensions 15.5 × 15.5 × 6 in

Value priced system with Fabtech quality
Increased ground clearance for offroad
Tubular UCA design with urethane bushings for quiet ride
Extended range upper ball joints allow for increased travel
Suspension can be restored to stock
Easy bolt on installation

2019 Ford Ranger Lariat L4.2300cc Suspension::Lift Kits
2019 Ford Ranger XL L4.2300cc Suspension::Lift Kits
2019 Ford Ranger XLT L4.2300cc Suspension::Lift Kits


There are no reviews yet.

Be the first to review “Fabtech 3.5in Ball Joint UCA System – Component Box 2019 Ford Ranger 4WD”

Product categories

Featured Products

Quick Links