RTD Interface & MPVI2 – Returning Back to stock.

* Video on bottom of page *

Step 1 – Plug up your RTD Interface or MPVI2  to your OBDII port, and to your laptop. A good internet connection is required.

__________________________________________________

Step 2 – Open your HP Tuners software.

NOTE: RTD requires the RTD Flasher software, and the MPVI2 requires the VCM Editor (BETA) version software.

__________________________________________________

Step 3 – Open and load your stock file.

__________________________________________________

Step 4 – Turn your key to the On position, but DO NOT Start the vehicle. If you have push-button start, press the start button while your foot is OFF the brake pedal.

NOTE: Turn off all accessories to prevent battery drain that can interfere with the process.

__________________________________________________

Step 5 – Click Write Vehicle in the menu and the Vehicle Writer box will open.

__________________________________________________

Step 6 – Click on Write in the Vehicle Writer box.

NOTE: It will take about 3 minutes to complete.

__________________________________________________

Step 7 – Follow the prompts to "Turn Ignition OFF. Wait 3 seconds. Turn Ignition on and click OK".

 

__________________________________________________

Step 8 – You will see a Write Completed message. You are safe to close that window and disconnect from vehicle.