PBH Gen 1 6R80 Transmission Harness for Coyote Swaps

PBH Gen 1 6R80 Transmission Harness for Coyote Swaps

PCP-1117

$399.99

Description

The PBH 6r80 transmission harness gives you exactly what you need to get the swap done. PBH’s harness uses OEM connectors, is completely loomed, and labeled. The blunt leads are to simplify speedometer connection and are clearly labeled. The O2 Sensor leads are extended so aftermarket extension harnesses do not need to be added for long tube or custom header design. Designed for use in engine swaps where the 6R80 automatic transmission is being used. It is compatible with all 2011-17 6r80 transmissions from both Mustang and F150. It is designed for off road use only.

 

 

Additional information

Weight 5 lbs
Dimensions 6 × 5 × 3 in
Details

CONNECTORS
*All connectors are loomed and labelled for easy installation. The following connectors and leads are included in this harness: STARTER- this lead with an eyelet is for the starter solenoid trigger.
* ALT- this connector is for coyote alternator only. Compatible with 2011-17 Coyote alternators.
* ELEC STEERING- this connector is for the electric steering rack from 2011-14 Mustang GT. Additional wiring is needed to complete installation. The provided plug is the pcm communication with the rack. TRANS-connector for the transmission DRIVER/PASS 02-connector for forward O2 sensors.
* BODY HARNESS-this connector is the pass through from the trans harness direct to the body harness.
* PCM-connector for transmission harness that connects direct to the PCM

BLUNT LEADS
*SPEEDO POWER(red)-provides 12v power for speedometer interface box
*SPEEDO GROUND(blk/wht)-provides ground for speedometer interface box
*SPEEDO SIGNAL(brwn/grn)-provides factory speed signal to be converted for aftermarket gauges

Reviews

There are no reviews yet.

Be the first to review “PBH Gen 1 6R80 Transmission Harness for Coyote Swaps”

Product categories

Featured Products

Quick Links