Name: Whipple 3.0L GEN 6 Stage 1 Supercharger System - 2021-2023 F150 5.0L
SKU: WK-2316-STG1-30
Availability: InStock

Description

The all new Gen 6 features an entirely new inlet design to further increase SC intake efficiency to make even more efficient power! The Stage 1 system bolts to the factory engine with no cutting or grinding while using the stock 90mm throttle body and makes up to 650* tire shredding foot pounds of torque and 725* horsepower to the flywheel!

This all-new system features their record breaking 3.0L Gen 6 twin-screw rotors and patented dual pass, dual core intercooler system making this the most efficient and highest horsepower turn-key system on the market today. Offered in both Stage 1 and Stage 2 configurations, each kit is 50-State emissions legal under CARB EO D-231-71.

Stage 1 utilizes the factory throttle body, 50 lb-hr dual pattern fuel injectors, and 4.00” supercharger pulley for about 9-10psi at sea level. Click for more information on Stage 1
Stage 2 includes Whipple’s billet 132mm throttle body, 2021 GT500 50 lb-hr dual pattern fuel injectors, and 3.875” supercharger pulley for about 10-11psi at sea level. Click for more information on Stage 2

Kits include all required components for installation along a Tomahawk handheld programmer. The engine and transmission tuning was developed and tested in tandem with Whipple’s partners at Ford ensuring the very best drivability, power and durability on 91-93 octane pump gasoline.

Other New Features Include:

2021-2023 Ford F150 5.0L Gen 6 SC Kit
Stage 1: 650 TQ, 725 HP to flywheel
Patented dual pass, dual core intercooler design
Whipple Tomahawk OBDII flash tool included
Whipple 3.0L Gen5x twin-screw design
Massive oversized heat exchanger and pump for increased cooling capacity

*Targeted Flywheel HP range is based on 93 octane testing. Results may differ depending on conditions and modifications.

Additional information

Weight

240 lbs

Dimensions

48 × 48 × 24 in

Overview

WHIPPLE SUPERCHARGERS F150 EXCLUSIVE FEATURES:

* Works with new OTA style PCM
* Patent Pending dual pass dual core intercooler design for nearly twice the area of any other intercooler on the market
* No other upgrades required, just massive power right out of the box
* Front entry Gen 5x W185ax (3.0 liters/3000cc) Whipple twin-screw supercharger that significantly outperforms competitions 2.3L and 2.65L roots-type systems
* Gen 5x supercharger features new 3×4 rotor combination for increased RPM capacity, large diameter for increased airflow and small leak path, increased helix for optimal sealing
* Oversized Crusher™ 150mm inlet for maximum airflow capacity and minimal rotor cavitation
* Inverted design allows for massive, oversized intercooler core compared to other smaller intercooler cores giving * Whipple lower air charge temps which allows more power at lower boost
* Massive air-to-water aluminum bar-plate intercoolers offer more cooling than any other positive displacement system available, nothing comes close
* High flow intercooler pump, nearly double the flow of the standard units others use
* Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy
* Included OBDII flash tool, new Tomahawk flash tool with the new Flight Control technology
* Tomahawk allows wheel/tire axle changes (a Whipple exclusive)
* 50 lb-hr dual pattern fuel injectors vs stock 17 lb-hr stock port injectors
* Exclusive 3×4 rotor combo for significant increase in airflow under the curve than less efficient 4×4 roots
* Extra plenum volume below intercooler core for far less pressure drop and better use of the increased surface area of the massive intercooler core
* More boost at the "hit" than any other twin-screw
* Flat torque curve for incredible acceleration
* Largest dual pass heat exchanger on the market as standard for incredible intercooler water temps
* Fits under factory hood with no modifications
* No cutting or grinding on the engine block
* No internal modifications required
* Kits come complete with all necessary parts and hardware for installation
* Plug and play wiring with male and female connections
* Proven 6-rib belt system and adjustable idler system
* OEM quick connect fittings for easy installation
* Available in wrinkle black, polish, Ford textured blue or any custom color
* Instant boost at the touch of the throttle
* 3 minute pulley changes
* Easy belt changes
* Lightweight pocketed 6061 T6 billet aluminum SC pulley